sunjoe LJ602E, Operator'S Manual

2

2.  Ensure the log is free from items that may be projected or 

cause damage to the machine (ie.: nails, wire).

3.  Ensure the end of the log is cut square and all branches 

have been cut flush.

OPERATION

Operator Requirements

1.  Only one person shall operate the log splitter. All other 

individuals and animals shall maintain a safe distance 

during operation (see safety warning in Preparation).

2.  Always operate the machine in a standing position and in 

a location that is not in the path of projected debris. The 

location of the machine should provide safe footing and 

balance for the operator.

3.  Do not

 operate the machine while under the influence of 

alcohol, drugs or physically, mentally fatigued. Always be 

alert and watch what you are doing!

4.  Contact with the moving parts can amputate body parts. 

Do not put any part of your body near moving parts.

Workload Requirements

1.  Never exceed the operating capacity of the log splitter.
2.  Always split the log in the direction of the grain. Do not 

place a log across the log splitter.

3.  Never split more than one log at a time.
4.  Do not load a log when the ram is moving.

Log Splitting

1.  Remove any keys and adjusting wrenches before turning 

the machine ON.

2.  Do not use accessories or attachments that are not 

recommended in this manual.

3.  Place the log on the log retention brackets. Do not hold or 

secure the log with your hands.

4.  Do not split wood that takes more than 5 seconds to split. 

Doing so will apply excessive pressure on the ram cylinder 

and damage the machine.

5.  Do not push/force the log onto blade. Always let the blade 

initiate splitting the log.

6.  If the log moves during operation, stop and reset.
7.  If a log is jammed do not request assistance of a second 

person. Ensure the machine power is disconnected and 

built up pressure released before attempting to  

release log.

8.  Ensure the machine is turned OFF when not in use. If  

the machine is left unattended then disconnect power to  

the machine.

MAINTENANCE AND STORAGE

1.  Maintain or replace safety and instruction labels. Ensure 

safety guards are in place.

2.  Disconnect the power and ensure built up pressure has 

been released from the tool before cleaning, repairing, or 

inspecting the log splitter.

3.  For best operation keep the blade sharp, moving parts 

lubricated and the machine cleaned.

4.  Always check for damaged or worn parts, alignment of 

moving parts, and tightness of bolts and screws before 

each use.

5. 

Replace oil as specified in the Maintenance section. 

Follow all local regulations and laws concerning disposal 

of waste oil.

6. 

Qualified mechanics and electricians must carry out repairs.

7.  When not in use, always store the machine in a secure 

location that children cannot access. Store the machine in a 

dry environment. The machine can be transported or stored in 

the ambient temperature between 77ºF – 131ºF (25ºC – 55ºC).

Electrical Safety

1.  Ground fault circuit interrupter (GFCI) protection should 

be provided on the circuit(s) or outlet(s) to be used for the 

log splitter. Receptacles are available having built-in GFCI 

protection and may be used for this measure of safety.

2.  To reduce the risk of electric shock, this appliance has a 

3-prong grounding plug. Use this appliance only with a 

3-prong, UL-listed (CSA certified in Canada) extension 

cord recommended for outdoor use. Use only 3-wire 

extension cords that have 3-prong grounding plugs and 

3-pole receptacles that accept the tool’s plug.

3.  To prevent electric shock, use only with an extension cord 

suitable for outdoor use, such as SW, SOW, STW, STOW, 

SJTW, or SJTOW.

  Before use, check that the extension cord is in good 

condition. When using an extension cord, make sure to 

use one heavy enough to carry the current your product 

will draw. For lengths less than 50 feet, a No. 12 AWG 

extension cord should be used. An undersized cord will 

cause a drop in line voltage resulting in loss of power  

and overheating.

Extension Cord

Length

Wire Gauge (A.W.G.):

Up to 25 ft

(7.5 m)

+20 ft - 50 ft

(+7.5 m - 15 m)

14

12

m

WARNING 

m

Electric shock may cause SEVERE INJURY or 

DEATH. Heed these warnings:

•  Do not allow any part of the log splitter to make 

contact with water while it is in operation. If the 

appliance becomes wet while turned off, wipe dry 

before starting. 

•  Use only a UL-, CSA-, or ETL-rated extension cord for 

outdoor, all-weather use.

•  Do not use an extension cord over 50 ft (15m).
•  Do not touch the appliance or its plug with wet hands 

or while standing in water. Wearing rubber boots 

offers some protection. 

EXTENSION CORD CHART