background image

5

Know Your Electric Log Splitter

Read the owner’s manual and safety instructions carefully before operating the log splitter. Compare the illustration below  

to the log splitter in order to become familiar with the location of the various controls and adjustments. Save this manual for  

future reference.

1.  Log pusher
2.  Log rail
3.  Splitting wedge
4.  Bleed screw
5.  Oil drain bolt
6.  Lifting handle
7.  Supporting leg
8.  Log retaining plates
9.  Motor

10. Appliance cord
11. 

On/Off switch

12. Switch box 
13. Rear wheels 
14. Hydraulic control lever
15  Control lever guard
16. Max pressure limit screw
17. Beam

7

8

9

10

11

12

13

14

Technical Data

Motor  .........................................  

15A (S3:  5 min on/ 10 min off)

Rated Voltage  ................................................... 120 V AC  60 Hz
Splitting Force Max  ........................................................... 5 ton
Ram Force/  ......................................................................... 5 ton 

Continuous Force
Material  ..............................................................................  Steel
Log Length Max  .................................................. 20.5 in. (52 cm)
Log Diameter Max  ............................................  10 in. (25.4 cm)
Wedge Height  ..................................................... 5 in. (12.7 cm)

 

 

Beam Height  ....................................................... 5.5 in. (14 cm)
Hydraulic Cylinder Size  .................................... 29.7 in. x 2.3 in. 

(Length x Diameter)

 .......................................

(75.5 cm x 5.9 cm)

Hydraulic Rod Size  ........................................... 30.2 in. x 1.2 in. 

(Length x Diameter)

 ..........................................

(76.8 cm x 3 cm)

Hydraulic Capacity  ................................................ 1.1 gal (4.2 l)
Wheel Size  ...........................................................6 in. (15.2 cm)
Weight  ............................................................... 92.6 lbs (42 kg)

15

THE OTHER SIDE

16

1

2

3

4

5

6

17

Summary of Contents for LJ602E













Reviews: