8
operates then the following actions are recommended:
1.
Make a first higher cut then make a second cut with the
required cutting height.
2.
Push the mower more slowly or release the lever and
use the push powered function.
3.
Check the blade is correctly adjusted so the grass is
cut cleanly.
Environment
When the time comes to dispose of this product please
consider the environment and take it to a recognised recycling
facility instead of disposing with general household waste.
The mower contains a sealed lead acid (Pb) battery which
must be disposed of properly.
Call your local council, civic amenity site, or recycling centre
for information on the recycling and disposal of electrical
products and lead acid (Pb) batteries.
FAQ
Why does my mower stop?
Make sure the battery is charged, properly seated and locked
in position. Ensure the key is fitted and in the ON position.
The reset button is preventing damage from overload, allow
a few minutes for the mower to cool clear any debris and
resume.
Press the reset button and hold the operation lever up to
restart the mower.
Where should I keep my battery?
The battery should ideally be stored between 10ºC and 24ºC
(50ºF and 75ºF) so the best place would be inside your house
or garage.
IMPORTANT: Charge battery after each use.
My lawn is very hard to cut, what can I do?
Cut the grass more often to keep it shorter. Ensure the mower
is maintained correctly. Do a high cut before cutting the grass
short. Ensure blades are adjusted correctly. Charge the battery.
My mower is noisy or won’t cut the grass.
Check the blades are correctly adjusted to give a clean cut.
My battery runs out before I finish mowing my lawn.
MJ420C Reel Mower can be used as a push mower if the
battery needs charging or if the grass is very thick.
How can I get my mower repaired if it is damaged?
Please call 1-866-766-9563 for assistance
Where do I find my serial number?
In front of the main unit and under the battery.
What is your returns policy?
See inside cover of manual.
Fig. 18
LED lights
