background image

9

Care and Maintenance 

CAUTION

:

 Remove the key and Battery before 

carrying out any maintenance. Do not accidentally turn the 
unit on while cleaning it.

• Check for any faults such as loose or damaged blades, 

loose fittings and worn or damaged components. Ensure 
the mower is in full working order before operating it.

• Check that covers and guards are correctly fitted and are 

not damaged in any way.

• Carry out any repairs before using the lawn mower again.
• Clean the lawn mower using a soft brush or cloth.
• Do not use abrasive materials to clean the product or 

immerse it in water.

• Don’t use on wet ground.
• Don’t allow pieces of string, rope, stones or fabrics to enter 

the unit.

• Beware of raised areas such as paving stones or manhole 

covers that can damage the blades.

Storage

Before storing, remove the Safety key and Battery. Turn the 
machine on its side and clean the blade area. If grass cuttings 
are compacted in the blade area, remove with a wooden or 
plastic implement. Remove all grass and debris.

• Clean the exterior of the machine thoroughly using a soft 

brush or cloth.

• Do not use water, solvents or polish.
• Store the lawn mower in a dry place and oil the blades.
• Do not place other objects on top of the machine.

For storage in confined spaces the handles can be removed 
from the mower. Disconnect the power cord and flex the lower 
handles to remove from the frame locating lugs.

Never Store the Mower With a Flat Battery. The battery 
should ideally be stored between 10ºC and 24ºC (50ºF and 
75ºF).
To keep the battery in prime condition it is best to charge 
the battery after each use, and every 3 months if stored. 

After each use charge for 16 hours to ensure the battery is fully 
charged.

IMPORTANT

: Charge the battery after each use.

Service and Support

If your Lawn Mower requires service or maintenance, please 
call 1-866-766-9563 for assistance.

Model and Serial Numbers 

When contacting the company or reordering parts, you will 
need to provide the model and serial numbers of your product. 
These are found on the decal affixed to the housing or handle 
of your Cordless Reel Mower. Copy these numbers into the 
space provided below.

Record the following numbers from the housing or handle of your  
new product:

M  J    4   2   0   C

Model #:

Serial #:

Summary of Contents for MJ420C











Reviews: