12
Features
LCD Display Backlight
1. The generator LCD display backlight comes pre-
programmed from the factory to briefly light the panel and
then turn off automatically.
2. To reprogram the backlight to stay on until turned
off manually, press and hold the ON/OFF button for
approximately 3 seconds (Fig. 16).
3. After approximately 1.5 seconds, the unit will beep
once, but continue pressing ON/OFF button down for
approximately three more seconds until the unit beeps
again and the backlight is illuminated (Fig. 16).
4.
To reprogram the backlight so that it turns off
automatically, repeat the steps above.
Fig. 16
Turn ON backlight: press 3 seconds
Turn OFF backlight: press 3 seconds
Summary of Contents for SJ1440SG-RM
Page 24: ...snowjoe com ...