FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the first piece of the extension wand and align the two tabs with the inside of the middle wand.
3. Once aligned, push in the extension wand into the middle wand, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
SPX2000, SPX2500, SPX2600
SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the first piece of the extension wand and align the two tabs with the inside of the gun.
3. Once aligned, push in the extension wand into the trigger gun, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
MOST SPX3000
MOST SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the first piece of the extension wand and align the two tabs with the inside of the transfer adapter.
4. Once aligned, push in the extension wand and twist counter clockwise to lock the wand into the trigger gun.
5. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
MOST SPX2000
SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the first piece of the extension wand and align the two tabs with the inside of the gun.
3. Once aligned, push in the extension wand into the trigger gun, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
