sunjoe SPX206E-RM, Operator'S Manual

8

Unpacking

Carton Contents

• 

Electric pressure washer

•  H

andle

• 

Trigger gun

• 

Spray wand assembly

• 

Adjustable spray wand nozzle

•  Two (2) Phillips head screws (for handle)
• 

Cord holder

• 

Needle clean-out tool (included with manual packet)

• 

High-pressure hose

•  Garden hose adapter (female coupler)
• 

Manuals with registration card

1.  Carefully remove the pressure washer and check to see 

that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new electric 

pressure washer. The packaging is made of recyclable 

materials. Properly dispose of these materials in 

accordance with local regulations.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils, 

or small parts. These items can be swallowed and pose a 

suffocation risk!

m

WARNING!

 Do not connect to power supply until 

assembly is complete. Failure to comply could result in 

accidental starting and possible serious personal injury.

Assembly

Tools required: Phillips head screwdriver

1.  Following the alignment grooves at the top of the machine 

body, slide the handle into position from the front to the 

back, so that the solid side of the handle faces the front 

of the washer. Secure the handle using a Phillips head 

screwdriver and the two (2) supplied Phillips head screws 

(Fig. 1).

2.  Slide the cord holder into position (Fig. 2).

3.  Fit the two pieces of the spray wand assembly together 

and rotate it until the two parts are completely locked  

(Fig. 3).

Fig. 1

Handle

Alignment 

grooves 

R

Fig. 2

Cord holder

Fig. 3