background image

 

 

 

 

 

 

 

 

 

 

 

 
 
WARNING: 

1. Assembly Instructions must be followed. 

2. Gazebo must be secured / anchored when fully assembled.

 

 
SAFETY INFORMATION: 

Please read and understand this entire manual before attempting to assemble or install the product. 

  When installing and assembling the item, it is recommended two or more adults are involved. 

  This product is intended for outdoor use only and should be placed on flat, horizontal ground. 

  Ensure enough clearance around the product. 

  Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning. 

  Do not climb on top of the item. Falling off it can result in serious injury, possibly even death. 

  This package contains small items and plastic bags that should be kept away from children. 

  Ensure all connectors and poles are firmly secured in position. It is important to do so before use to avoid 

collapsing or damage to the item, which could also result in injury. 

  Never barbecue under this item or use lanterns that contain open flames. 

  Center hook’s maximum weight capacity is 26 lbs. 

 

WARNING: 

Keep all flame and heat sources away from the tent fabric. This tent is made with fabric that meets CPAI-84 

specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any 

flame source. The application of any foreign substance to the tent fabric may render the flame-resistant 

properties ineffective. Remove the roof during severe weather conditions such as sustained strong winds, 

hurricanes, tropical downpours and snow. The manufacturer or retailer is not liable for any loss of the product 

or other items due to the failure to take down the item during any inclement weather. 

ASSEMBLY INSTRUCTIONS   

ITEM# L-GZ806PAL-A 

SKU# 147079 

10’ X 12’ BALI WICKER GAZEBO 

Summary of Contents for BALI 147079









Reviews: