Attach side mesh (D) to base (K) by using nuts (AA) and
flat washers (CC). Do not fully tighten the connections in
this step..
Step 1:
Step 2:
Step 3:
Step 4:
Connect rear board (C) and side mesh (D) by using
bolts
(BB) and washers (CC). Do not fully tighten the
connections in this step. Connect the door and the side
mesh by the same way.
Connect fire bowl (I) and ash tray (J) by using
bolts (DD)
and nuts (EE).Fully tighten all connections as shown.
Connect upper base (B) and chimney top (A) by using
nuts (AA) and flat washers (CC).Do not fully tighten all
the connections in this step.