Fig.8
：
Attach the oblique beam (K) with down pipe (L) as pic. shows.
Fig.9
：
Insert the up side of assembled oblique beam (K) into the tube of big top connector (O).
Fig.10
：
Use bolt (GG), washer (BB) and nut (EE) to fasten the down side pipe (L) on the oblique
beam down side connector (I).
Fig.11
：
Insert the middle beam (N) into the big top connector (O), then attach the hook (T) on the
connector.
Fig.12
：
Use bolt (GG), washer (BB) and nut (EE) to fasten middle beam downside pipe (N) on the
connector (J). then cover the big canopy (V) on the top, but do not unfold it.
Fig.13
：
See as the pic. fix the small top oblique beam (P) with small top connector (Q).
Fig.14
：
Attach the assembled small top to pipe of big top oblique beam (K) through small top
oblique beam (P).
Hardware Pack 3
HH
Ring
52 PCS
II
￠
8*180 Stake
16 PCS
