DD
Ф
6*180
Stake
16 PCS
Hardware Pack 2
Fig.5
:
Insert one end of the slanting bar connector (C4) into the large top connector (A2). Insert and screw
the hook (B2) tightly into the large top connector (A2).
Fig.6
:
Connect the other ends of the slanting bar connector (C4) to the top bars (D1, E2. )
Fig.7
:
Insert top bar 2 (E2 ) into top bar connector (E3), and top bar 1 (D1) into top bar connector (E3).
Fig.8
:
Insert the other ends of the top bar connectors (E3) into the posts (I, J), respectively. Then place
the large canopy (M) on the top of the frame. Do not expand the large canopy at this step.