background image

Owner’s Manual — Sunlawn MM-1 

 

 
 
 
 
 

Please read this guide and use these operating instructions to become 
familiar with the mower and its features. The notes on safety and 
maintenance procedures are important for the use and enjoyment of 
this product. 

 
 
 
 
 

Sunlawn, Inc. (the Manufacturer) guarantees this product for private 
use for a period of 2 years from the date of purchase. This guarantee 
applies to all serious defects of the product which can be proven to 
have been caused by faulty materials or workmanship. The 
Manufacturer has the option of supplying a replacement of the product 
in perfect working order or repairing the product free of charge at an 
authorized facility, provided that the following conditions are fulfilled: 

 

The appliance has been handled correctly and in accordance with 
the instructions in the Owner’s Manual. 

 

Neither the buyer nor a third party has attempted to repair the 
product. 

This guarantee is void if replacement parts or accessories are used 
other than those approved by the Manufacturer. 
The product, accompanied by a copy of the original receipt, must be 
delivered, prepaid, to a service center authorized by the Manufacturer. 
This Manufacturer’s guarantee shall not affect any guarantee claims 
against the dealer or seller of the product. 

 
 
 
 
 

This mower is designed for use on residential lawns. It is not designed 
for commercial use or for use in public facilities, parks, sporting 
grounds, roads, or in agriculture or forestry areas. 

This mower is for cutting lawns only. It must not be used to trim 
hedges, bushes or shrubs, for cutting or pruning, or for any mowing 
where both wheels and the roller are not fully supporting the mower. 

BEFORE USING THE NEW MANUAL REEL MOWER 

WARRANTY 

USE OF THIS PRODUCT 

Summary of Contents for MM-1











Reviews: