Mystic Tan Kyss™
Owner’s Manual
3
SAFEGUARDS
Your safety and the safety of others are very important. We have provided important
safety information in this manual. Please read and obey all safety messages before
operating the Mystic Kyss.
It is the responsibility of the owner and operator of the Mystic Kyss to comply with all
appropriate safety and health laws, as well as other applicable national, state and local laws and
ordinances when operating and maintaining the Mystic Kyss equipment.
See pages 7-9 for
important information regarding the safe operation of this equipment.
To reduce the risk of injury, fire, electrical shock or property
damage, always observe proper care when handling or performing
maintenance on this equipment. The hazard symbol above is used to
highlight instances when a hazard may be present, but always follow
all relevant safety guidelines when operating this equipment.
Familiarize yourself with all precautions and read all warnings in this
manual before operating the equipment.
Perform monthly inspections
and replace any damaged or excessively worn components.
NOTE ON PART REPLACEMENT: DIELECTRIC GREASE
Stringent quality control and testing has shown that adding dielectric grease to some of the
connectors within the booth will extend the life of the connectors by
300%
. When replacing
components OUTSIDE of the control panels, add dielectric grease to the pins on the female
connector to ensure the maximum life for the component. A packet of dielectric grease will
be shipped with any component that it is recommended for, including: compressor, sump
pump, heaters, lights, fans, door sensor, extension jumpers, motors, and motor drives.
Do
NOT
use dielectric grease on control panels, touchscreen, power supplies, circuit boards,
network cables, or the power cord.