Mystic Tan Kyss™
Owner’s Manual
43
Email Notifications
The booth can also be set up to notify staff or technicians of Faults via email in real time. Once a
Fault is recorded, the booth will send an email informing the determined parties of the issue.
For the Email Notification feature to operate correctly, the booth must have Internet
connectivity and the appropriate email addresses added in the Admin > System page
(default page for Admin screen). The booth will allow up to two email addresses to be notified.
Press the Settings gear icon Staff >
Messages page to review any
recorded faults.
Home Page
Pressing the Setting gear icon will
take you directly to the Staff >
Messages screen and display a list
of any recorded messages.
List of all
current
messages
Clear Faults Button- take
any appropriate action
resulting from the message
and press the Clear Faults
button. If the issue is
resolved, the message will
not reoccur.
In the message above, the booth shows an orange fault (Fault severity explained below). In this
case, solution may still reside in the reservoir, but no additional action is required. Press the
To add email addresses for notification, go to the Admin > System page. You must enter the
Admin password to access any Admin settings. The booth will support up to
two
(2) email
addresses. If two are used, they should be separated with a comma only.
