5.
INSTALLATION,FOLDING AND DEBUGGING
5.1
Installation
5.1.1 Cut thenylon tie from the battery (fig.1). Remove the
rubberblock from the battery then firmly push thebattery
backwards until it locks in position with anaudible click.
5.1.2 Switch the motor lock levers to”magnetic drive” mode to
make sure that the wheelchair is not on manual mode.(fig.3)
5.1.3 Install joystick.Turn the securement knobto loosen. Insert the
joystick tubing. When therequired position is reached, tighten
the knobto secure.
（
fig.2
）
fig.1
fig.2
fig.3
5.2
Adjusting Armrests
For the convenience of getting on/off the wheelchair for people who have
trouble with walking, the armrest of this product can be flipped up. To flip up
the armrest, just pressthe lock button under the armrest, flipping upward
(Fig.6).To flip down the armrest, just press downward the armrest, when
you hear the "click" sound,indicating that the armrest has is locked into
place.The armrest is reset now.
fig.6
Armrest
Locking
Knob
5.2.1 when pull the motor lock lever to "manual", the wheelchair is on
manual mode, which can be pushed by hands; When the motor lock
lever to "electric", the wheelchair is on electric mode, which is unable
to move the chair by hands
5.2.2 Press the joystick power button, battery indication light will be on.
5.2.3 Rotate the joystick lever to the end, observe the movement of
wheelchair wheels, then rotate the other directions to observe if there
is movement of the wheels.
5.2.4 Release the joystick lever, it will come back to middle position, then
you observe the wheels should be stopped.
9
10
5. INSTALLATION,FOLDING AND DEBUGGING
