6.2.3 Operation
Please do it according to precautions operation.
WARNING!
Do not drive your wheelchair unless getting help from your assistant
when the wheelchair is in manual mode. Otherwise it may result in
personal injury.
Do not set your wheelchair in manual mode by yourself while you
are seated in the wheelchair. Otherwise it may result in personal
injury. In this case, please ask your assistant to help you.
Do not set your wheelchair in manual mode when it is on an incline.
Otherwise, the wheelchair could be out of control to roll down by
itself, and result in personal injury.
7.
FAULT DIAGNOSIS AND TROUBLESHOOTING
This product has an automatic fault warning function to give you very
convenience. Once it malfunctions, the LEDs on the controller will
flash with alarm sounded by the horn. You can find where a fault is
according to information in Table 2.
If the fault still exists after checking out the fault based on that in
table 2, do not drive the wheelchair. Please turn off the power and
consult your service agent immediately.
15
16
LED display
1 LED lamp flashes
2 LED lamp flashes
3 LED lamp flashes
4 LED lamp flashes
5 LED lamp flashes
6 LED lamp flashes
7 LED lamp flashes
8 LED lamp flashes
9 LED lamp flashes
Charge the battery
Check the motor and wiring harness
Check if the brake lever is in the
correct position, and if there is
damage for brake.
Check the motor and wiring harness
Check if the brake lever is in the
correct position, and if there is
damage for brake.
Check if the brake is released, and
wheels are locked.
Check if the rocker of controller in
the central position.
Controller fault
Controller fault
Battery is low capacity
The left motor failure
The left brake failure
The right motor failure
The right brake failure
Current Overload of the
controller
Failure of the joystick
Failure of the controller
itself
Failure of the controller
Fault Diagnosis
Troubleshooting
Remark
7. FAULT DIAGNOSIS AND TROUBLESHOOTING
