background image

13

Input: charge with a 12 V car adapter (CLA)

The scope of delivery involves a 12 V car adapter cable (optional an adapter 
cable with battery alligator clips for car batteries). You may charge your 
pedelec battery from every 12 V car jack without the solar panel.
There is no danger of deep cycle for a car or solar battery. But the start battery 
should not give more than 100 Wh to make possible the car battery to start. 
One hour charging generates enough power for up to 10 km. The deep cycle 
of car battery is not possible. mVELO finishes the charging automatically 
above the minimum charging voltage of your car battery.

Charging from 24 V board voltage is possible in principle, but there is no protection from 
deep discharging of 24V car battery.

Do not use mVELO and pedelec battery at high temperatures and strong sunshine in the 
car, because high temperatures can damage these devices.

Output: charge the pedelec battery

Before starting the charging process, make sure, whether your mobile device is 
suitable for a charging voltage (see “which battery fits to mVELO).

 Before charging the device make sure whether your pedelec battery is based on the 
Li-Ion technology and if the voltage of both devices matches. The overload can 
damage your battery, for instance, if mVELO with nominal output voltage 37 V is 
connected to a 26 V pedelec battery.

Summary of Contents for mVELO





















Reviews: