4
I. Product Introduction
This user guide is only suitable for 2D barcode scanner. The purpose is to know all knowledge with
barcode identification equipment for customers. This manual is mainly for the software engineers and some
customerswho want to know the device in further.
This manual lists the main function of the scanner, including: barcode reading, supported barcode
type,data edition,command setting and advance setting.
II Quick to use
2.1 Install method
For USB device, it is plug and play, no need extra power supply to identify HID device. That
’
s convenient
appropriate forWindows,Linux,Androidand other system. Also, support Virtual COM port, just need an extra
drivesupply,which can be supported by this company or dealers to offer.The physical serial port conforms to
standard RS-232 interfaces, which can directly communicate with standard RS232 device.Note ,in case of serial
port,additional Power DC 5V is generally required. For details, please refer to the serial port function
section.Some of models support for KB interface. Need to power off the device and plug in the device with
common keyboard, then power on again and start to communicate.
2.2 Quick to use
After connecting in a short time on device, the scanner will be on by itself, include interface, power on
indicate, volume indicate,configuration, parameters setting. Normally, directly pressing the button can
activatedecoding. In additional, some models also support automation induction trigger, serial command trigger.
2.3 Settings method
There are two methods for set up.
One method is without parameter set up which scan one barcode is ok.
Example:
“
enable successful reading voice prompt
”
, or
“
enable Code 39
”
.
The other method needs to set up parameter.
Example: set
“
98
”
as suffix.
Setting steps:
“
custom suffix
”
,
“
3
”
,
“
9
”
,
“
3
”
,
“
8
”
,
”
Save
”
.
