SunMaxx Solar | 5098 NY 206 Bainbridge NY 13733 | 1.877.786.6299 1.877.270.7875 fax | www.sunmaxxsolar.com
3. Operating Modes
In menu “3. Operating modes” the controller can either be placed in automatic mode, switched off,
or placed in a manual operating mode.
The menu is closed by pressing “esc” or selecting “Exit operating modes”.
3.1 AUTOMATIC
Automatic mode is the normal operating mode of the controller. Only automatic mode provides proper controller function taking into account the
current temperatures and the parameters that have been set! After an interruption of the mains voltage the controller automatically returns to the
last operating mode selected!
3.2 MANUAL
The relay and thus the connected consumer are switched on and off by pressing a key, with no regard to the current temperatures and the param-
eters which have been set. The measured temperatures are also shown to provide an overview and function control.
DANGER
When operating mode “Manual” is activated, the current temperatures and the selected parameters are no longer considered.
There is a danger of scalding or serious damage to the system. The operating mode “Manual” may only be used by specialists for
brief function tests or during commissioning!
3.3 OFF
CAUTION
When the operating mode “Off” is activated, all controller functions are switched off. This can lead, for example, to overheating on
the solar collector or other system components. The measured temperatures are still displayed to provide an overview.
4. Settings
The necessary basic settings required for the control function are made in menu “4. Settings”.
The menu is closed by pressing “esc” or selecting “Exit settings”.
CAUTION
This does not under any circumstances replace the safety facilities to be provided
by the customer!
CAUTION
The following pages contain generally valid descriptions for the settings. Enumera-
tions may vary .
