SunMaxx Solar | 5098 NY 206 Bainbridge NY 13733 | 1.877.786.6299 1.877.270.7875 fax | www.sunmaxxsolar.com
6.12 DAYLIGHT SAVING TIME
When this function is active, the controller’s clock changes automatically to and from DST (DST, Daylight Savings Time).
Default: On
6.13 SLEEP MODE
When active, the displays back light is switched off after 2 minutes of inactivity.
Voreinstellung: Aus
CAUTION
If a message is waiting, the backlight is not switched off.
6.14 TEMPERATURE UNIT
This menu is used to select the temperature unit that is displayed.
Settings range: °F or °C / Default: °C
7. Menu Lock
Menu “7. Menu lock” can be used to secure the controller against unintentional changing of the set
values.
The menu is closed by pressing “esc” or selecting “Exit menu lock”.
The menus listed below remain completely accessible despite the menu lock being activated, and can be used to make adjustments if necessary:
1.
Measurement values
2.
Statistics
6.23.
Time & date
7.
Menu lock
8.
Service values
To lock the other menus, select “Menu lock on”.
To enable the menus again, select “Menu lock off”.
Setting range: on, off/default setting: off
8. Service Values
The menu “8. - Service values” can be used for remote diagnosis by a specialist or the manufacturer
in the event of an error, etc.
