TitanPower-ALDH40-PS Collector Installation
Manual
5
Step 5:
Place roof flashing over the lower roof hook
clamp.
Step 6:
Cut overhanging shingles if necessary to
accommodate flashing
Figure 7
Figure 8
Step 7:
Insert the bottom lip profile of the collector into the
lower roof hook clamp by angling the collector as needed.
Step 8:
Slide the upper roof hook clamp (made in
step 1) into collector’s upper lip.
Figure 5. Roof flashing is placed over roof hook clamp to
prevent water from leaking through roof penetrations.
Figure 6. The roof hook clamp should be placed under
shingles as shown.
