8
DIAGNOSTIC MENU
With this screen you have entered Diagnostic Mode. In this mode you can independently
actuate a variety of machine functions and view state of inputs and outputs of machine control
system. This is helpful for diagnosing or repairing machine problems.
NOTE:
Because machine functions can be actuated independently, great care should be taken
when in Diagnostic Mode. Fixtures or tools can be damaged. Before leaving Diagnostic Mode, it
is a good practice to return machine to same state it was in before entering Diagnostic Mode.
NOTE:
Any speeds or positions set while you are in Diagnostic Mode is only for Diagnostic
Mode and will not be retained when you exit that mode. Diagnostic Mode will not change
parameters that pertain to your setup.
Function Keys
Main:
Return to main menu
(Go to Page 2)
.
PLC:
Allows monitoring and modifying of PLC
(Go to Page 9)
.
I/O:
Displays status of machine inputs and outputs
(Go to Page 11)
.
Stroker:
Allows testing of stroker system
(Go to Page 12)
.
Spindle
: Allows testing of spindle
(Go to Page 13)
.
Feed:
Allows testing of feed system
(Go to Page 14)
.