9
PLC - HOME
This screen allows monitoring and modifying of PLC.
NOTE:
All of the buttons have been password protected and should only be used with the
assistance of or by Sunnen personnel. Incorrect changes in this screen can render the machine
inoperative.
Indicators
ON
– PLC is on.
INTF
– PLC has an internal fault.
EXTF
– PLC has an external fault.
BUSF
– There is an active Profibus fault.
RUN
– PLC is in run mode.
STOP
– PLC is in stop mode.
Autostart
– After startup PLC will be set to same mode (RUN/STOP) as it was prior to closing.
StartAtBoot
– HMI will automatically start machine software after bootup.
Function Keys
Exit:
Return to diagnostic menu
(Go to Page 8)
.
Tuning:
Go to PLC tuning screen
(Go to Page 10)
.