5
SETUP MENU
This screen is used for entering or editing of honing parameters for the workpiece.
Spindle Speed
– This value is recommended from part specs screen and can be edited here.
Stroke Speed
– This value is recommended from part specs screen and can be edited here.
Spindle Load
– This value is recommended from part specs screen and can be edited here.
Honing Time
– Enter desired honing time.
Teach Start Of Stroke
– Press this button to set start of stroke at current stroker position.
Teach End Of Stroke
– Press this button to set end of stroke at current stroker position.
Stroker Position
– Displays current stroker position.
Function Keys
Part Specifications:
Return to Part Specifications
(Go to Page 4)
.
Main:
Return to Main Menu Screen
(Go to Page 2)
.
Stroker (Enabled/Disabled):
Toggle between stroker enabled or disabled. When enabled
stroker can be moved by joystick control. When disabled stroker can be moved manually by
hand.
Jog Spindle:
Press and hold to slowly rotate spindle.
Run:
Go directly to Run Menu
(Go to Page 6)
.
