14
TROUBLESHOOTING
PROBLEM
SOLUTION
There is no display on the computer.
1. Remove the computer and verify that the wire
from the computer is properly connected to
the wire that comes from the upright post.
2. Check if the batteries are correctly positioned
and battery springs are in proper contact with
batteries.
3. The batteries in the computer may be
unresponsive. Change to new batteries.
The elliptical wobbles when in use
Turn the end cap on the rear stabilizer as needed
to level the elliptical.
The elliptical makes squeaking noise when
in use.
The bolts may have become loose on the
elliptical. Please inspect all of the bolts and
tighten any loosened bolts.
Summary of Contents for Endurance Zone SF-E3804
Page 3: ...2 EXPLODED DIAGRAM 1 ...
Page 19: ...18 ...