EXERCISE COMPUTER INSTRUCTION MANUAL
FUNCTION BUTTONS:
MODE
– Press to select functions.
– Press and hold the MODE button for 3 seconds to reset time, distance and calories.
SET
– Press to set values of time, distance and calories when not in scan mode.
RESET
– Press to reset time, pulse, distance and calories to zero when not in scan mode.
A. Press the MODE button to cycle through functions: time, distance and calories to select desired
function.
B. Use the SET button to set a value for time, distance or calories. The value of a function will be set
on a countdown.
C. Press the MODE button once more, to save the functi
on value you’ve created.
FUNCTIONS:
1.
SCAN: Press MODE button until “▼” appears at SCAN position (or until “SCAN” appears), the
computer will rotate through all 5 functions: Time, Speed, Distance, Calories and Total Distance. Each
function will be display for 6 seconds.
2.
TIME: Counts the total time of the exercise from start to finish.
3.
SPEED: Displays the current speed.
4.
DISTANCE (DIST): Counts the distance of an exercise from start to finish.
5.
CALORIES (CAL): Counts the amount of total calories burned during an exercise from start to
finish.
6.
TOTAL DISTANCE (ODO): Counts the total distance after installing the batteries.
7.
AUTO ON/OFF & AUTO START/STOP: If the elliptical is put into motion, or any button is pressed,
the computer will turn on.
After about 8 minutes without any signal, the power (computer) will turn off automatically.
ALARM
The functions of time, distance and calorie can be set to countdown. When the value goes to zero,
the computer will beep.
Press MODE to select the function, then press SET to adjust the value.
SPECIFICATIONS
FUNCTION
Auto Scan
Every 6 seconds
Running Time
00:00 ~ 99:59 (Minute: Second)
Current Speed
The max pick-up signal is 999.9 MILE/H (or 9999RPM)
Trip Distance
0.0 ~ 999.9 MILE
Calories
0 ~ 9999 Kcal
Total Distance
0 ~ 9999 MILE
Pulse Rate
40-240BPM
Battery Type
2 pcs of SIZE- AAA
Operating Temperature
0
℃
~ +40
℃
(32
℉
~ 104
℉
)
Storage Temperature
-10
℃
~ +60
℃
(14
℉
~ 140
℉
)
Summary of Contents for G8300
Page 3: ...EXPLODED VIEW ...
Page 5: ...HARDWARE PACKAGE ...
