MAINTENANCE AND CARE
Regular maintenance requires you to wipe the stepper clean after each use. Only use a dry
cloth when doing so. Always store your stepper in a dry, cool area.
Do not leave outdoors
as prolonged exposure to weather/temperatures will cause damage to parts and functions
of the machine over.
NOTE:
It's normal for sound to come from the cylinder as the cylinder gets hot during use.
Do NOT touch the cylinder during or after use to avoid burn injuries.
IF THE STEPPER STARTS TO SCREECH DURING EXERCISE:
1. Loosen the screw of the U-shaped bracket and cable
2. Lubricate the U-shaped bracket and the cable to improve the sliding condition (as seen
in the picture below).
3. After lubricating with oil, secure the U-shaped bracket and cable by tightening the screw.
NOTE:
We recommend using a
silicone-based
lubricant.
U-Shaped
Bracket
Cable
5
Summary of Contents for P8000
Page 3: ...2 EXPLODED DIAGRAM ...
Page 9: ......
