background image

8

OPERATION & MAINTENANCE

OPERATING INSTRUCTIONS:

1.

Please read all instructions before attempting to assemble the equipment. While

assembling and during the use of the equipment, please make sure to follow all

instructions carefully, any improper techniques of use and/or assembly may result in

injury and/or damage to the equipment.

2.

The suggested exercise regimen for optimal results is 10-15 minutes per day, at least

three times a week.

3.

Before beginning exercise, always inspect the equipment to insure that all moving

parts as well as hardware are secured correctly and are in proper condition.

4.

To adjust the level of tension before beginning or during an exercise, turn the

Tension Knob (No. 7)

to the left or right and align the arrow to the preferred tension as

shown below. This machine contains 8 different levels of tension, level 1 being the

lowest and level 8 being the highest. (Turn the Tension Knob to the Left to decrease the

level of tension, turn the Tension Knob to the right to increase the level of tension).

MAINTENANCE INSTRUCTIONS:

Only use a dry cloth to gently wipe the bike. It is recommended that you clean the bike

after each use. Store the bike in a dry area; do not leave the bike outdoors as prolonged

exposure to the weather will cause damage to the parts and affect the functions of the

machine.

 

Summary of Contents for SF-B0419











Reviews: