background image

 

EXERCISE COMPUTER 

 

SPECIFICATIONS 

TIME---------------------------------------------------- 00:00-99:59 MIN: SEC

 

 

SPEED------------------------------------------------- 0.0-999.9 MI/H (Miles per Hour) 

DISTANCE-------------------------------------------- 0.00-99.99 MI (Miles) 
CALORIES-------------------------------------------- 0.00-999.9 KCAL 

 

KEY FUNCTIONS 

MODE: 

Press to select the desired function. (Time, Speed, Distance, Calories). 

Hold the MODE button for 3 seconds to reset Time, Distance and calories. 
 

AUTO ON/OFF: 

The  computer  will  turn  on  when  you  start  pedaling  or  when  the  MODE  button  is  pressed.  The 

computer will shut off if the machine is inactive for about 4 minutes. 

RESET: 

Reset the computer by pressing and holding the MODE button for 3 seconds. Remove the batteries 

will also reset the computer and return all function settings back to zero.  

MODE: 

To select the LOCK MODE setting, press the MODE button when the pointer on the function you 

wish to select begins to flash. Once locked, only the selected function will be displayed. Press the 

MODE button to choose another function. 

 

FUNCTIONS 

TIME: 

Counts the total time of an exercise from start to finish. 

SPEED: 

Displays the current speed being obtained. 

DISTANCE: 

Counts the total distance of an exercise from start to finish. 

CALORIES: 

Counts the number of total calories burned during an exercise from start to finish. 

SCAN: 

Automatically  displays  functions  in  the  following  order  shown:  Time,  Speed,  Distance, 

Calories (repeat). 

BATTERY: 

This  computer  uses  two  AA  batteries.  If  the  display  appears  improper  or  becomes 

difficult to read, please try installing new batteries before attempting to contact. Always change both 

batteries at the same time. Do not mix battery types and do not mix old and new batteries. Dispose 

the batteries according to your state and regional guidelines. 

 
 
 
 
 
 
 
 
 
 
 

Version:2.3 

Summary of Contents for SF-B2618












Reviews: