Sunny Health & Fitness SF-B2630 User Manual Download

Page: 10 / 14

Step 4:

Insert the

Long Axle (35)

into the

Handlebar Post (4).

Attach the left/right

Handlebar

(5L/R)

to the

Long Axle (35)

tightly with

Hex Pan Head Screw (30)

Spring Washer (31)

Flat Washer (32)

, and

Wave Washer (38)

. Then connect the

Pulse Wire (33)

with

Pulse

Extension Wire (40)

Attach the left/right

Pedal (9L/R)

and

Connecting Bar (27)

to the left/right

Crank

(10L/R)

of the

Main Frame (1)

tightly with

Bearing (45)

Spacer (46)

Alloy Sleeve (47)

and

left/right Nylon Nut (48L/R)

. Then cover with

Cap (51)

Note:

Turn

Left Pedal (9L) counterclockwise

to tighten. Turn

Right

Pedal (9R)

clockwise

to tighten. And make sure the

Pedal (9L/R)

is locked tightly before movement, otherwise

the pedal will be damaged.

Fix the

Connecting Bar (27)

to the

Left/Right

Handlebar (5L/R)

tightly with

Hex

Screw (42)

Flat Washer (16)

and

Nylon Nut (43)

. Then cover with

Caps (49)

and

(50)

Summary of Contents for SF-B2630















Search results

Summary of Contents for SF-B2630

Reviews:

Related manuals for SF-B2630

Brands by name

Popular brands

Sunny Health & Fitness SF-B2630, User Manual

Search results

Summary of Contents for SF-B2630

Reviews:

Related manuals for SF-B2630

Brands by name

Popular brands