background image

 

FEATURES 

 
AUTO SHUT-OFF 

The elliptical automatically shuts off after 30 minutes. When there is 1 minute 
remaining,  the  elliptical  will  beep.  Press  Auto  Exercise,  Manual  Exercise  or 
Mode button to restart the timer at 30 minutes and continue exercising. 

 
PEDOMETER 

The  display  will  count  steps.  For  each  rotation,  the  display  will  increase  in 
increments of 2.After the first rotation, it will display 2, then 4, then 6 and so on. 
Display range is 0-9999. Pedometer starts at zero each time you turn on the 
elliptical. 

 
DIRECTION CORRECTION 

Do not pedal in the opposite direction as the setting you choose. 
During Manual Exercise or Auto Exercise, if you pedal in the opposite direction 
of  the  setting,  the  elliptical  will  beep,  then  change  to  the  direction  you  are 
pedaling. 
If you repeatedly pedal in the opposite direction as the setting, the elliptical will 
stop and you will get an error code. 

 

 

MOVING THE PRODUCT 

Always use the built-in handle to carry or move the elliptical. 
 

 

PRODUCT CARE 

Storage 

When not in use, place the product into the box and place in a dry, ventilated, 
cool area. 
Do not twist the power cord. 
Do not place product in direct sunlight or heat. Do not store where there is high 
humidity, such as bathrooms. 

 

Cleaning 

Before cleaning, make sure to turn power off and unplug the power cord. Use a 
dry cloth to clean the surface of the product. 
Do not use corrosive cleaning agents to clean the product. 

 

Summary of Contents for SF-E3626









Reviews: