10
EXERCISE METER
MODE
: Press to select function.
Press and hold for 2 seconds to reset all values except
TOTAL DIST
FUNCTIONS AND OPERATIONS:
1.
SCAN
: Press MODE button until
“▼” appears at SCAN Position. Computer
will rotate through all the 6 functions: Time, Speed, Distance, Calorie, Total
Distance, and Pulse. Each function will display for 6 seconds.
2.
TIME
: Counts the total time from exercise start to end.
3.
SPEED
: Displays current speed.
4.
DIST
: Count the distance from exercise start to end.
5.
CALORIES(CAL)
: Counts the total calories from exercise start to the end.
6.
TOTAL DIST(ODO)
: Counts the total distance after installing the batteries.
7.
PULSE:
Press MODE button until
“▼” appears at PULSE. Before measuring
your pulse rate,
place both your palms on the contact pads and the computer
will show your current heart beat
rate in beats per minute (BPM) after 3~4 seconds.
Remark: During the process of pulse measurement, the measurement value may be higher
than virtual pulse rate during
the first 2~3 seconds, then it will return to normal level.
To ensure testing
accuracy, it is suggested that user test pulse while not pedaling. The
measurement value cannot be regarded as the basis for medical treatment.
8.
AUTO ON/OFF & AUTO START/STOP
: Without any signal for 4 minutes, the
power will turn
off automatically.
BATTERY
If there is a problem with the display, try replacing the batteries. When changing the batteries,
change both of them. Do not mix battery types. Do not mix old and new batteries.
Dispose of batteries according to your state and local guidelines.
SPECIFICATIONS
Version 1.5
Summary of Contents for SF-RB4631
Page 3: ...2 EXPLODED DIAGRAM ...
