background image

 

IMPORTANT SAFETY INFORMATION 

 
We thank you for choosing our product. To ensure your safety and health, please use this equipment 
correctly. It is important to read this entire manual before assembling and using the equipment. Safe 
and effective use can only be achieved if the equipment is assembled, maintained, and used properly. 
It  is  your  responsibility  to  ensure  that  all  users  of  the  equipment  are  informed  of  all  warnings  and 
precautions.

 

1. 

Before starting any exercise program, you should consult your physician to determine if you have 
any medical or physical conditions that could put your health and safety at risk or prevent you from 
using the equipment properly. Your physician’s advice is essential if you are taking medication that 
affects your heart rate, blood pressure, or cholesterol level. 

2. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular 
heartbeat,  shortness  of  breath,  lightheadedness,  dizziness,  or  feelings  of  nausea.  If  you  do 
experience any of these conditions, you should consult your physician before continuing with your 
exercise program. 

3. 

Keep children and pets away from the equipment. The equipment is designed for adult use only. 

4. 

Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To 
ensure safety, the equipment should have at least 8 feet (240CM) of free space behind it and 2 
feet (60CM) on each side. Do not place the treadmill on any surface that blocks air openings. To 
protect the floor or carpet from damage, place a mat under the treadmill. 

5. 

Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the 
equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 

6. 

Always use the equipment as indicated. If you find any defective components while assembling or 
checking  the  equipment,  or  if  you  hear  any  unusual  noises  coming  from  the  equipment  during 
exercise,  discontinue  use  of  the  equipment  immediately  and  do  not  use  until  the  problem  has 
been rectified. 

7. 

Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become 
entangled in the equipment. 

8. 

Do not place fingers or objects into the moving parts of the equipment. 

9. 

The maximum weight capacity of this unit is 220 pounds (100 KG). 

10. 

The equipment is not suitable for therapeutic use. 

11. 

To  avoid  bodily  injury  and/or  damage  to  the  product  or  property,  proper  lifting  and  moving  are 
required. 

12. 

Your product is intended for use in cool and dry conditions. You should avoid storage in extreme 
cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. 

This equipment is designed for indoor and home use only; it is not intended for commercial use! 

 

 

Summary of Contents for SF-T4400
























Reviews: