15
KEY FUNCTION
1. START:
Press to start up the treadmill in the stop state. The default speed displayed is 0.6 MPH.
2. PAUSE / STOP:
When the treadmill is running, press PAUSE / STOP once to pause the motor, and PAUSE will
show on the display. Time, distance and calorie data will be automatically saved. The speed will go
to zero, but the incline level stays the same. Press PAUSE / STOP again to stop the motor, and all
date will be cleared.
If you press START within 5 minutes, the data of time, distance and calorie will be accumulated,
and the starting speed is the same speed as before you pressed PAUSE.
PAUSE function lasts for about 5 minutes. If you do not press START again, the data will
automatically clear.
3. PROG:
In standby mode, press to select manual mode, P1-P9, HRC, and FAT programs. Manual mode is
the default mode.
4. MODE:
In standby mode, press to select H-1 to H-3 different countdown modes. H-1 is time countdown
mode, H-2 is distance countdown mode, and H-3 is calorie countdown mode. All mode parameters
can be adjusted by pressing SPEED+ / SPEED -, and then press START to start the treadmill.
5. SPEED+ / SPEED -:
In setting state, press to increase or decrease the set value. When the motor is running, press to
increase or decrease the speed. Value increases or decreases in increment of 0.1 KM/time or
0.1MI/time. After holding for more than 2 seconds, automatic continuous acceleration and
deceleration will be realized. The default speed is 0.6 MPH / 1.0 KMH. Max operating speed is 11
MPH / 18 KMH.
6. SPEED SHORTCUT KEYS (on the handrail):
Press to select 1MPH, 3MPH, 5MPH and 9MPH when the treadmill is running.
7. I / INCLINE -:
When the motor is running, press to increase or decrease the incline. Value increases or
decreases in increment of 1 grade. When setting program parameters, press to increase or
decrease the set value. If you press and hold for 2 seconds, value will increase or decrease
quickly.
8. INCLINE
SHORTCUT KEYS (on the handrail)
:
Press to select grade 2%, 5%, 9% and 12% when the treadmill is running.
DISPLAY FUNCTION
Speed display:
Display the current running speed.
Incline display:
Display the current incline.
Time display:
Display the running time in manual mode and display the countdown time in the time
countdown mode or in program mode.
Distance display:
Display the accumulated distance in manual mode or program mode or the
countdown distance in distance countdown mode.
Calorie display:
Display the accumulated calorie in manual mode or in program mode, display the
countdown calorie in countdown calorie mode.
Heart rate display:
Detect heat rate signals and display the pulse value.
Data display range of various parameters:
TIME: 0:00
– 99.59 (MIN)
DISTANCE: 0.00
– 99.9 (MILE)
CALORIES: 0.0
– 999 (KCAL)
Summary of Contents for SF-T7873
Page 3: ...3 EXPLODED DIAGRAM ...
