background image

 

 

IMPORTANT SAFETY INFORMATION 

 

We thank you for choosing our product. To ensure your safety and health, please use this equipment 

correctly. It is important to read this entire manual before assembling and using the equipment. Safe 

and effective use can only be achieved if the equipment is assembled, maintained, and used 

properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings 

and precautions. 

 

1.  Before starting any exercise program, you should consult your physician to determine if you 

have any medical or physical conditions that could put your health and safety at risk or prevent 

you from using the equipment properly. Your physician’s advice is essential if you are taking 

medication that affects your heart rate, blood pressure, or cholesterol level. 

2.  Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 

exercising if you experience any of the following symptoms: pain, tightness in your chest, 

irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If 

you do experience any of these conditions, you should consult your physician before continuing 

with your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult use only. 

4.  Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. 

To ensure safety, the equipment should have at least 8 feet (240 CM) of free space behind it 

and 2 feet (60 CM) on each side. Do not place the treadmill on any surface that blocks air 

openings. To protect the floor or carpet from damage, place a mat under the treadmill. 

5.  Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of 

the equipment can only be maintained if it is regularly examined for damage and/or wear and 

tear. 

6.  Always use the equipment as indicated. If you find any defective components while assembling 

or checking the equipment, or if you hear any unusual noises coming from the equipment during 

exercise, discontinue use of the equipment immediately and do not use until the problem has 

been rectified. 

7.  Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become 

entangled in the equipment. 

8.  Do not place fingers or objects into the moving parts of the equipment. 

9.  The maximum weight capacity of this unit is 265 pounds (120 KG). 

10. This equipment is not suitable for therapeutic use. 

11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are 

required. 

12. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme 

cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. This equipment is designed for indoor and home use only; it is not intended for commercial use. 

 

 

IMPORTANT NOTE: 

The running belt must be lubricated before the first use! Please see Page 8 for instructions on how 

to properly apply lubricant. 

 
 

Summary of Contents for SF-T7951




















Reviews: