10
ADJUSTMENTS GUIDE
ADJUSTING THE HEIGHT AND BALANCE
In order to achieve a smooth and comfortable ride, you must
ensure that the stability of the bike is secured. If you notice that the
bike is unbalanced during use, you should adjust the
Foot Pads
(No. C09)
located beneath the
Front
&
Rear Stabilizers (No. A02
& No. A03)
of the bike. To do so, use
Spanner (No. B18)
to loosen
Nut (No. D08)
by turning it
clockwise
(direction A). With the nut
loosened, rotate the
Foot Pads (No. C09)
until it sits level with the
surface that the bike is on. When you have finished adjusting the
Foot Pads (No. C09)
, use
Spanner (No. B18)
to re-tighten the
Nut (No. D08)
by turning it
counter-clockwise
(direction B). If
required, repeat this process to adjust the remaining
Foot Pads
(No. C09)
.
ADJUSTING THE SEAT
The seat of this bike is fully adjustable as it moves
Up
,
Down, Fore
(forward), Aft (backward).
To adjust the height of the
Seat Post (No. A04)
, loosen and pull
the [seat]
T Shape Knob 2 (No. C15)
outward, then raise or lower
the seat to the desired height. Once adjusted, re-insert and tighten
the
T Shape Knob 2 (No. C15)
to secure the seat in place.
To adjust the seat back and forth, loosen and pull
T Shape Knob 1
(No. C14)
outward, then slide the
Seat Slider Tube (No. A05)
to
the desired position. Once positioned, re-insert and tighten the
T
Shape Knob 1 (No. C14)
to secure the seat slider tube in place.
ADJUSTING THE HANDLEBAR
It is important that the handlebar and seat are both set to the
correct height to your body. To adjust the handlebar height, loosen
and pull the [handlebar]
T Shape Knob 2 (No. C15)
outward, then
slide the
Handlebar (No. A06)
up or down to the desired height.
Once adjusted, re-insert and tighten the
T Shape Knob 2 (No.
C15)
to secure the handlebar in place.
Summary of Contents for SF-B1735
Page 3: ...2 EXPLODED DIAGRAM 1...
Page 4: ...3 EXPLODED DIAGRAM 2 HARDWARE PACKAGE...
Page 18: ......