15
1. TARGET: the preset CADENCE.
2. In STOP mode, press SET key to enter the TARGET setting in STOP mode. Press SET to
increase the CADENCE five at a time. The setting change is 15
→
20
→
……
110
→
115
→
120
→
15
→
20
→……→
115
→
120
→
15
→
20
→
……
3. The setting range of 15 -120 (Preset value is 60 CADENCES which equals six bars).
4. Each bar equals 10 CADENCE. Total is 12 bars.
When Current CADENCE is less than Target CADENCE, the up arrow next to the bicycle will be
displayed.
Each arrow equals 10 CADENCES (1-10 CADENCES displays one arrow,
11-20 displays two). The maximum arrows displayed is 12.
This down arrow next to the bicycle icon will be displayed when the current
CADENCE is more than the TARGET CADENCE. The bicycle icon will be displayed during exercise
mode.
RACE MODE:
Press and hold MODE for 2 seconds to enter RACE mode.
In RACE mode, only TIME and DIST can be set.
Default values for 10 minutes / 4 (KM or Miles).
Total is 10 bars.
PULSE:
To measure the pulse, press MODE until computer is on the PULSE function. Hold the hand pulse
sensors for at least 5 seconds to measure your pulse. This value is for reference only. It cannot be
used as the basis for medical treatment.
BATTERY:
This computer uses two AAA batteries. If the display appears incorrectly or becomes
difficult to read, please install new batteries. Always change both batteries at the same time. Do
not mix battery types and do not mix old and new batteries. Dispose batteries according to your
state and regional guidelines.
Summary of Contents for SF-B1735
Page 3: ...2 EXPLODED DIAGRAM 1...
Page 4: ...3 EXPLODED DIAGRAM 2 HARDWARE PACKAGE...
Page 18: ......
