7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 3:
WARNING!
Read instructions carefully as
improper assembly may cause permanent
damage to your bike.
Remove the preassembled 2
Bolts (No. D01)
and
2
Flat
Washers (No. D02)
from the
Main Frame
(No. A01)
using
Spanner (No. B16).
Attach the
Bottle Holder (No. B14)
to the
Main Frame (No.
A01)
using the 2
Bolts (No. D01)
and 2
Flat
Washers (No. D02)
that were removed. Tighten
and secure with
Spanner (No. B16)
.
Remove the 2
Nylon Nuts (No. D28L/R
) located
on the
Pedals (No. C16L/R)
. Align the
Left Pedal
(No. C16L)
with the
Left Crank Arm (No. B03L)
at 90°. Screw the
Left Pedal (No. C16L)
counter-clockwise
into its corresponding
Left
Crank Arm (No. B03L)
. Once screwed in place,
use the
Spanner (No. B16)
to hold the bolt of the
pedal, then screw
Left Nylon Nut (No. D28L)
clockwise
into the thread end of the
Left Pedal
(No. C16L)
. Secure with
Spanner (No. B18)
.
Align the
Right Pedal (No. C16R)
with the
Right
Crank Arm (No. B03R)
at 90°. Screw the
Right
Pedal (No. C16R)
clockwise
into its corresponding
Right Crank Arm (No. B03R)
. Once screwed in
place, use the
Spanner (No. B16)
to hold the bolt
of the pedal, then screw
Right Nylon Nut (No.
D28R)
counter-clockwise
into the thread end of
the
Right Pedal (No. C16R)
. Secure with
Spanner (No. B18)
.
Summary of Contents for SF-B1735
Page 3: ...2 EXPLODED DIAGRAM 1...
Page 4: ...3 EXPLODED DIAGRAM 2 HARDWARE PACKAGE...
Page 18: ......