15
OPERATING INSTRUCTIONS
The meter turns on when you start pedaling or when you press a key.
After 4 minutes of inactivity, the meter shuts off.
MODE
: Press this button to select and set to a function, hold for 3~4 seconds to reset
TIME, DISTANCE, CALORIES, except ODO, the data will be cleared.
SET:
After selecting the function, press this button to set the value of TIME, DISTANCE
and CALORIES. The value of the function will be set on a countdown.
RESET
:
Press this button for 3 seconds to reset the value of TIME, DISTANCE, or
CALORIES to zero.
FUNCTIONS:
DISTANCE:
It shows how many Miles you ran on the machine. It starts from 0.00 to
999.9 MI.
CALORIES:
It shows how many calories you burned. It starts from 0.00 to 9999 kcal.
SPEED:
It shows the speed of your workout. It starts from 0.00 to 99.9 mi/h.
ODO:
It shows the total distance after installing the batteries. (When you replace the
batteries, all the values will reset to ZERO automatically.)
TIME:
It indicates how long you exercised. It starts from 00:00 to 99:59min.
RPM:
It shows how many revolutions per minute.
SCAN:
It shows each function for 4 seconds in the following sequence:
TIME
—SPEED—DIST—CAL—ODOL—RPM
COUNTDOWN
You can preset the time, distance or calories or your workout. Press MODE to select the
function. Press SET to increase the value. The meter will count down when you start
pedaling.
If you have problems with the meter display, change the batteries. This meter uses 2
AAA batteries. If you replace the batteries, replace both at the same time. Replacing the
batteries will reset all the values in the meter.
Summary of Contents for SF-B2620
Page 3: ...2 EXPLODED VIEW...
Page 17: ...16...