16
MAINTENANCE
Cleaning
The elliptical trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical trainer
after each use. Be sure that the computer display panel is not exposed to excessive
moisture, as this could potentially cause an electrical hazard and/or electronics to fail.
Please keep the elliptical trainer, especially the computer console, out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness weekly.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM
SOLUTION
There is no display on the computer.
1. Remove the computer console and verify
the wire that comes from the computer
console is properly connected to the wire
that comes from the main frame.
2. Verify that the batteries are correctly
positioned and are in proper contact with
the battery springs.
3. The batteries in the computer console may
be dead, remove and replace with new.
The elliptical trainer makes a squeaking
noise when in use.
1. Inspect bolts on elliptical for looseness,
tighten as needed.
2. Inspect moving parts to ensure that they
are properly lubricated.
The elliptical Trainer is not stable while in
use.
1. Inspect all the bolts on elliptical trainer
have been fully tightened .
2. Adjust the end caps (No. 69) on the rear
stabilizer to get a best result.
Summary of Contents for SF-E1404
Page 4: ...3 OVERVIEW DRAWING ...