OPERATING THE CONSOLE
WINDOW DISPLAY
1.
SPEED/PULSE:
The speed range is 0.6-11MPH.
0.6MPH is the default running speed.
When the runner holds both hands on the pulse sensors (located on the handles), the
system will calculate the runner’s heart beat and display it in this window. The pulse range
is 50-200 beats/min (This data is just for reference, and cannot be used as the medical
data).
2.
DISTANCE:
Displays the distance from 0.0-99.9 miles. When the count reaches 99.9, it
will reset and begin counting again from 0.0. When in
Countdown Mode
, it will count down
from the desired setting to 0.00. When it reaches 0.00, the machine will stop smoothly and
display “End” and automatically reset to the initial setting after 5 seconds. When setting
programs, this window is shown as PI-P15, U1-U3
, and “FAT”.
3.
TIME:
Displays the running time from 0:00-18 hours. When the count reaches
the maximum of 18 hours, the machine will reset to 0:00 and continue to operate. When in
Countdown Mode
, it will count from the set time to 0:00. Once the count reaches 0:00, the
machine will
stop smoothly and display “End”, then automatically reset to the initial setting
after 5 seconds.
4.
CALORIES/INCLINE:
Displays the amount of calories burned from 0 to 999 KCAL and
the incline level from 0-16. When the count reaches 999, it will reset and start back from 0.
When in
Countdown Mode
, it will count down from the desired setting to 0. Once it reaches
0, the machine will stop smoothly and display “End”, then automatically reset to the initial
setting after 5 seconds.
13
Summary of Contents for SF-T7512
Page 4: ...EXPLODED DRAWING 3...