background image

 

 

IMPORTANT SAFETY INFORMATION 

 

We  thank  you  for  choosing  our  product.  To  ensure  your  safety  and  health,  please  use  this 
equipment  correctly.  It  is  important  to  read  this  entire  manual  before  assembling  and  using  the 
equipment.  Safe  and  effective  use  can  only  be  achieved  if  the  equipment  is  assembled, 
maintained, and used properly.  It is your responsibility to ensure that all users of  the equipment 
are informed of all warnings and precautions. 
 
1.  Before starting any exercise program, you should consult your physician to determine if you 

have  any  medical  or  physical  conditions  that  could  put  your  health  and  safety  at  risk  or 
prevent you from using the 

equipment properly. Your physician’s advice is essential if you are 

taking medication that affects your heart rate, blood pressure, or cholesterol level. 

2. 

Be  aware  of  your  body’s  signals.  Incorrect  or  excessive  exercise  can damage  your  health. 
Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, 
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If 
you  do  experience  any  of  these  conditions,  you  should  consult  your  physician  before 
continuing with your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult use 

only. 

4.  Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. 

To ensure safety, the equipment should have at least 8 feet (240 CM) of free space behind it 
and  2 feet  (60  CM) on  each  side.  Do  not  place  the  treadmill on  any  surface  that  blocks air 
openings. To protect the floor or carpet from damage, place a mat under the treadmill. 

5.  Ensure that all nuts and bolts are securely tightened before using the equipment. The safety 

of the equipment can only be maintained if it is regularly examined for damage and/or wear 
and tear. 

6.  Always  use  the  equipment  as  indicated.  If  you  find  any  defective  components  while 

assembling  or  checking  the  equipment,  or  if you  hear  any  unusual  noises  coming  from  the 
equipment  during  exercise,  discontinue  use  of  the  equipment  immediately  and  do  not  use 
until the problem has been rectified. 

7.  Wear  suitable  clothing  while  using  the  equipment.  Avoid  wearing  loose  clothing  that  may 

become entangled in the equipment. 

8.  Do not place fingers or objects into the moving parts of the equipment. 
9.  The maximum weight capacity of this unit is 220 pounds (100 KG). 
10.  This equipment is not suitable for therapeutic use. 
11.  To avoid bodily injury and/or damage to the product or property, proper lifting and moving are 

required. 

12.  Your  product  is  intended  for  use  in  cool  and  dry  conditions.  You  should  avoid  storage  in 

extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 

13.  This equipment is designed for indoor and home use only; it is not intended for commercial 

use. 

 
 

IMPORTANT NOTE: 

The running belt must be lubricated before the first use! Please see Page 7 for instructions on 
how to properly apply lubricant. 

 

Summary of Contents for SF-T7946



















Reviews: