9
LUBRICATING THE TREADMILL
*
IMPORTANT NOTE:
This treadmill does come pre-lubricated, but it is recommended to lubricate your treadmill before
the first use.
RUNNING BELT & TREADMILL LUBRICANT:
Lubricating the
Running Board (No. 115)
and
Running Belt (No. 78)
is essential as the friction
affects the life span and operation of the treadmill. Inspect the
Running Board (No. 115)
and
Running Belt (No. 78)
regularly. If you find any wear on the
Running Board (No. 115)
, please
contact us at: support@sunnyhealthfitness.com
.
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating or repairing the
unit.
HOW TO LUBRICATE:
1.
Raise the
Running Belt (No. 78)
up on one side and apply lubricant to the
Running Board
(No. 115)
. Use a rag to thoroughly wipe the lubricant over the
Running Board (No. 115)
.
Repeat this process for the other side.
2.
The moving parts should turn freely and quietly. Abnormality of moving parts will affect the
safety of the equipment. Inspect and tighten bolts regularly.
3.
To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be
done on a regular basis.
4.
DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE
APPLYING LUBRICANT. A loose
Running Belt (No. 78)
will result in the runner sliding off
during use, while too tight of a
Running Belt (No. 78)
will negatively affect the motor’s
performance and also create more friction between the roller and
Running Belt (No. 78)
. The
most suitable tightness for the
Running Belt (No. 78)
is when it is pulled out
50-75mm
from
the
Running Board (No. 115)
.
The following time table is recommended:
Light user (less than 3 hours/ week)
every five months
Medium user (4-7 hours/ week)
every two months
Heavy user (more than 7 hours/ week) every month
Summary of Contents for SF-T7955
Page 3: ...2 EXPLODED DIAGRAM ...
Page 22: ...21 ...