19
LUBRICATING THE TREADMILL
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use.
RUNNING BELT & TREADMILL LUBRICANT:
Lubricating the
Running Board (No. D09)
and
Running Belt (No. C09)
is essential as the friction
between the two affects the life span and operations of the treadmill. Inspect the
Running Board (No.
D09)
and
Running Belt
(No. C09)
regularly. If you find any wear on the
Running Board (No. D09)
,
please contact us at: support@sunnyhealthfitness.com.
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating or
repairing the unit.
HOW TO LUBRICATE:
1. Raise the
Running Belt (No. C09)
up on one side and apply lubricant to the
Running Board (No.
D09)
. Use a rag to thoroughly wipe the lubricant over the
Running Board (No. D09)
. Repeat this
process for the other side.
2. The moving parts should turn freely and quietly. Abnormality of moving parts will affect the safety of
the equipment. Inspect and tighten all bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done
on a regular basis.
4. DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING
LUBRICANT. A loose
Running Belt (No. C09)
will result in the runner sliding off during use, while
too tight of a
Running Belt (No. C09)
will negatively affect the motor performance and also create
more friction between the roller and
Running Belt (No. C09)
. The most suitable tightness for the
Running Belt (No. C09)
is when it is pulled out
50-75mm
from the
Running Board (No. D09)
.
The following time table is recommended:
Light user (less than 3 hours/ week)
every six months
Medium user (3-5 hours/ week)
every three months
Heavy user (more than 5 hours/ week)
every two months
Summary of Contents for SF-T7971
