25
HANDRAIL CONTROL FUNCTIONS:
1.
START BUTTON:
Press the START button to start the treadmill. 0.5 MPH is the default start speed.
During the exercise, you can also press this button to pause the treadmill.
2.
STOP BUTTON:
When in use, press the STOP button to terminate your workout session. All data
will be deleted and reset to the initial setting.
3.
SPEED + BUTTON:
Press the + button to increase the speed in increments of 0.1 MPH (Miles per
hour).
4.
SPEED – BUTTON:
Press the - button to decrease the speed in increments of 0.1 MPH (Miles per
hour).
LUBRICATION REMINDER
Your treadmill needs lubrication maintenance every 188 miles. The system will release a beeping
sound every 10 seconds and displays an “OIL” icon on your LCD display. Please read the
LUBRICATING THE TREADMILL instructions on Page 19 to learn the proper steps to lubricate your
treadmill. Apply the lubricant oil to the middle of the running board on both sides. After application,
press and hold the STOP button for 3 seconds to clear the reminder.
POWER SAVE FUNCTION:
When the treadmill has been inactive for 10 minutes, it will enter Power Saving Mode. While the
treadmill is in this mode, the LCD display of the console will be turned off. To turn it back on, press any
button.
POWER ON:
Flick the power switch to this symbol to turn on the treadmill.
POWER OFF:
Flick the power switch to this symbol to turn the treadmill off at any time. This includes during exercise.
Summary of Contents for SF-T7971
