9
9. Maintenance and Treatment
Maintenance
1) You may feel the resistance of the running belt getting bigger after using for a long time
because the running belt and the plate need cleaning and lubricating, user
’s normal maintenance
is very essential. Please clean and lubricate the belt and belt plate as below:
Raise up the belt in one side, wipe some lubricant to the belt plate and do it the same in the other
side.
2) Check the bolts in each part of the equipment regularly, and tighten them. The moving parts
should turn freely and quietly. Abnormality of moving parts will affect the safety of the equipment.
3) Keep the equipment clean, do not clean the equipment with strong solvent.
4) The running belt is easy to wear out, if you find it worn or broken, you should contact the
technician to replace it. You should not use the equipment until the belt is repaired.
Malfunction
Malfunction
Reason
Treatment
Base is unstable
.
1) The ground is not flat or there is
small object on the ground.
2) The lock knob is not tightened.
1) Remove the objects.
2) Tighten the lock knob.
Noise from the
moving parts.
The magnets are too close.
Contact the technician to open
the cover for a check.
The running belt
deviates when
operating.
See article 7.
See article 7.
