5
6. Assembly Instructions
This treadmill needs two people to assemble it. Put all the parts on the floor, and follow the below
assembly instructions to assemble this treadmill.
Step 1: Install the Flywheel Cover
Attach the Flywheel cover (10) to the Main frame (1) with two Screws (40) and Flat washers (51).
(See figure 1)
Step 2: Install the Base Support
Attach the Base support (6) to the Left and Right handlebar supports (2,3) with four Bolts (43).
(See figure2)
Step 3: Install the Main Frame
Raise up the front part of Main frame (1) by two people.
Attach the front part of Main frame (1) to Left and Right
handlebar supports (2,3) with two Connection bolts (9)
and Flat washers (48). Attach the Lock Knob (23) to
the lower hole at the Left handlebar (2) and secure it
with the Main frame (1). Connect the Sensor wire (55)
from the Right handlebar support (3) to the Sensor (36)
from the Main frame (1). (See figure 3)
