background image

 

IMPORTANT NOTE: 

The running belt must be lubricated before the first use! Please see Page 8 for instructions on 
how to properly apply lubricant. 

 

IMPORTANT SAFETY INFORMATION 

 

We thank you for choosing our product. To ensure your safety and health, please use this 
equipment correctly. It is important to read this entire manual before assembling and using the 
equipment. Safe and effective use can only be achieved if the equipment is assembled, 
maintained, and used properly. It is your responsibility to ensure that all users of the equipment 
are informed of all warnings and precautions. 

 

1.  Before starting any exercise program, you should consult your physician to determine if you 

have any medical or physical conditions that could put your health and safety at risk or prevent 
you from using the equipment properly. Your physician’s advice is essential if you are taking 
medication that affects your heart rate, blood pressure, or cholesterol level. 

2.  Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. 

Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, 
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If 
you do experience any of these conditions, you should consult your physician before 
continuing with your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult use 

only. 

4.  Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. 

To ensure safety, the equipment should have at least 8 feet (240 CM) of free space behind it 
and 2 feet (60 CM) on each side. Do not place the treadmill on any surface that blocks air 
openings. To protect the floor or carpet from damage, place a mat under the treadmill.   

5.  Ensure that all nuts and bolts are securely tightened before using the equipment. The safety 

of the equipment can only be maintained if it is regularly examined for damage and/or wear 
and tear. 

6.  Always  use the equipment as indicated. If you find any defective components while 

assembling or checking the equipment, or if you hear any unusual noises coming from the 
equipment during exercise, discontinue use of the equipment immediately and do not use 
until the problem has been rectified. 

7.  Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may 

become entangled in the equipment. 

8.  Do not place fingers or objects into the moving parts of the equipment. 
9.  The maximum weight capacity of this unit is 240 pounds (110 KG). 
10. The equipment is not suitable for therapeutic use. 
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving is 

required. 

12. Your product is intended for use in cool and dry conditions. You should avoid storage in 

extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. This equipment is designed for indoor and home use only; it is not intended for commercial 

use. 

 

 

 

 

 

 
 

Summary of Contents for SF-TD7884






















Reviews: