12
MAINTENANCE & ADJUSTMENTS GUIDE
Cleaning the Sunny TreadPad:
•
Unplug the unit from the electrical source before you begin.
•
Pour a small amount of gentle detergent on a cotton rag or towel. Do not pour the detergent
on the running belt directly and do not use acidic or corrosive cleaners.
•
Wipe down the frame, motor encasement, and running belt. Do not wipe underneath the
running belt.
•
After a long period of use, it is normal for dust to accumulate. Please wipe the dust of gently.
Adjusting the Belt:
•
Start the SUNNY TreadPad and set the speed 2.5 mi/h .
•
If the running belt moves to the left: Turn the left adjusting screw half-circle clockwise.
•
If the running belt moves to the right: Turn the right adjusting screw half-circle clockwise.
•
If the running belt is slipping: Turn both left and right adjusting screws half-circle clockwise at
same time.
Lubricating the running belt:
•
Unplug the unit from the electrical source before you begin.
•
Lift up the running belt and apply the silicone lubricant underneath the surface of the running
belt.
•
Power on the Sunny TreadPad.
•
Allow the SUNNY TreadPad to operate at 2.5 mi/h for 10 to 20 seconds.
•
Do not add more than 5 ml - 10 ml of lubricant. The running belt will slip if it has too much
lubricant.
•
Apply Silicone lubricant once every 3 months.
Summary of Contents for TreadPad SF-T7970
Page 4: ...3...
Page 8: ...7 EXPLODED DIAGRAM...
