Step 3: Mounting the bolts for wall mounting on the wall
Required components:
Wall mounting angle, pen, distance measure for wall mounting (step 1),
drilling machine, bolts for wall mounting, measuring tool
Description:
Once you have found the required distance measure for wall mounting from step 1, it is
recommended to mark the wall mounting angle at the desired position on the wall in order to
position the wall mounting angles as well as possible. Keep a wall mounting angle with the holes for
the bolts for wall mounting on the wall - so that the wide side facing up. Then, use the pen to mark
the holes for the bolts for wall mounting. Now measure the distance measure to have the distance
from this wall mounting angle to the other mounting angle. Position the next mounting angle on this
position and do this step again. Use for an exact positioning optionally a spirit level. Mount the bolts
for wall mounting with the help of your marks on the wall. Place them in the wall, so that you can
later install the wall mounting angle.
Step 4: Mouting the wall mounting angle on the panel
Required components:
Wall mounting angle, bolts for mounting the wall mounting angle on the
panel, SUNNYHEAT heating panel, Allen key for bolts for panel
Description:
Within the frames at the back of the panel are threads. With these threads you mount
the wall mounting angle with the panel. The wall mounting angles should always be mounted on the
short side of the panel. Make sure that the threads are at an appropriate position so that you can
install the panel on the wall later. The panel should be tilted by 45 ° and not touch the wall. Place the
wall mounting angles with the holes for the bolts for the panel on the thread. The wide side of the
wall mounting angle should look to the ceiling and the holes for mounting the wall mounting angle to
the wall should look to the inside of the panel, so you make sure that you not see the holes so easily.
Now add the bolts into the holes on the wall mounting angles and into the threads of the panel.
Mount the bolts with the Allen key.
